You are here: Home » AMD64 burning issue (solved)

AMD64 burning issue (solved)

Posted on Thursday, July 13 2006 at 23:02 (Age: 15 yrs) | Category: Hardware

Since I upgraded to the AMD64 architecture some months ago, I always had the problem that burning CDs did not work anymore. I used a command line like


cdrecord -V gracetime=2 dev=3,0,0 speed=24 -dao -dummy driveropts=burnfree -eject -data test.iso


but burning failed some seconds after the write started.


Now, it seems that I found the solution: with kernel 2.6 and udev, it is not necessary to use the device numbers anymore. Instead, the device file can be used directly, like


cdrecord -V gracetime=2 dev=/dev/cdrw speed=24 -dao -dummy driveropts=burnfree -eject -data test.iso


This also seems to influence the way how cdrecord and the kernel interact, because the write process now does not abort anymore.



From: Travon on Tuesday, July 12 2016 08:46:59

:Tu gères La fréquence 868MHz via un ACT – Contrôleur Z-Wave RS232 ZCS201 sur le port série de la Zibase ?@ Arnaud :D¨psquo;arrÃ&s le support Zodianet, la gestion en local arrivera dans une MAJ à suivre après celle du 28/01/11. A suivre